The Silkland DP80 DisplayPort Cable review comes down to a specific fit: a 1.6-foot, VESA-certified DP 2.1 cable for high-bandwidth gaming setups where the PC and display are close together.
Its 80Gbps rating and support for high refresh rates are compelling, but the host graphics card and monitor need to support the modes you want to use.
Silkland DP80 Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact choice for gamers building a short DisplayPort 2.1 connection around compatible high-bandwidth graphics cards and monitors.
- VESA-certified DisplayPort 2.1 cable with a stated bandwidth of 80Gbps and male-to-male connectors.
- Measures 1.6 feet and is intended for indoor connections between DisplayPort-equipped computers or graphics cards and monitors.
- Supports uncompressed 4K at up to 240Hz, 8K at up to 60Hz, and 2K at up to 540Hz; listed DSC-enabled modes include up to 16K at 60Hz.
- Compatible with DisplayPort 2.0 and 1.4, and supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3.
Pros
- High 80Gbps bandwidth rating for compatible high-end display setups.
- Broad support for gaming features and a range of listed high-resolution, high-refresh modes.
Consider before buying
- The 1.6-foot length is restrictive if the PC and display are separated or cable routing needs extra slack.
- The highest listed modes require compatible source and display hardware, and some depend on DSC.
Read the full review summary
This male-to-male DisplayPort cable is designed for short runs between a PC or graphics card and a monitor.
Its listed capabilities include 80Gbps bandwidth, uncompressed 4K at up to 240Hz, 8K at up to 60Hz, and 2K at up to 540Hz; with DSC enabled, the description lists higher combinations, including up to 16K at 60Hz.
These are supported modes rather than a guarantee that every setup will reach them.
The DP80 makes the most sense for a desk where 1.6 feet is enough to connect the devices without excess cable.
VESA certification, backward compatibility with DisplayPort 2.0 and 1.4, and support for VRR, ALLM, FEC, and DSC 1.2a give it broad gaming-oriented appeal.
Buyers should confirm their graphics card, monitor, and desired resolution and refresh rate work together before choosing any high-bandwidth cable.
The buying factors
Silkland DP80 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The 80Gbps DP80 rating is suited to systems aiming for demanding high-resolution and high-refresh combinations.
High-refresh gaming fit
The listed support for VRR, ALLM, FEC, and DSC 1.2a targets gaming setups where smooth display output matters.
Compatibility flexibility
It supports DisplayPort 2.0 and 1.4 connections, though the full DP 2.1 UHBR20 modes depend on both connected devices.
Cable reach
At 1.6 feet, it can suit a compact desk layout but leaves little room for routing or repositioning.
Build details
Triple shielding, tinned copper conductors, a nylon exterior, and gold-plated connectors are useful construction features.
Setup convenience
The no-latch design is intended to make plugging and unplugging straightforward, while keeping the cable’s short reach in mind.
Key Features and Specifications of Silkland DP80
- VESA-certified DisplayPort 2.1 cable with a stated bandwidth of 80Gbps and male-to-male connectors.
- Measures 1.6 feet and is intended for indoor connections between DisplayPort-equipped computers or graphics cards and monitors.
- Supports uncompressed 4K at up to 240Hz, 8K at up to 60Hz, and 2K at up to 540Hz; listed DSC-enabled modes include up to 16K at 60Hz.
- Compatible with DisplayPort 2.0 and 1.4, and supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3.
- Construction details include 28AWG tinned copper conductors, triple shielding, a nylon exterior, and 24K gold-plated connectors.
- The no-latch connector design is paired with a stated 24-month service period and technical support.
Pros and Cons of Silkland DP80
Pros
- High 80Gbps bandwidth rating for compatible high-end display setups.
- Broad support for gaming features and a range of listed high-resolution, high-refresh modes.
- VESA certification and backward compatibility with DisplayPort 2.0 and 1.4.
- Shielded, braided-style nylon construction with gold-plated connectors.
Consider before buying
- The 1.6-foot length is restrictive if the PC and display are separated or cable routing needs extra slack.
- The highest listed modes require compatible source and display hardware, and some depend on DSC.
- Its short length and high bandwidth may be unnecessary for basic monitor connections or setups that do not need demanding refresh rates.
Who Should Buy Silkland DP80?
Good fit
Consider the Silkland DP80 if your computer and monitor sit close together and you want a short DisplayPort link for a high-refresh gaming display.
The combination of 80Gbps bandwidth, VESA certification, and gaming-oriented features gives it a strong feature set for a compatible DP 2.1 system.
Before buying, check the distance between the ports and allow room for the cable to reach without strain. Then confirm the graphics card and monitor support the resolution, refresh rate, and connection mode you plan to use.
The cable supports older DisplayPort versions too, but a backward-compatible connection will not create capabilities that the connected devices do not have.
Who should skip it
Skip this model if your PC and monitor need a longer run: 1.6 feet may be too short once you account for how the cable must route around your desk.
Look elsewhere if your setup uses HDMI instead of DisplayPort or if a standard DisplayPort connection already covers your monitor’s needs. The DP80’s extra bandwidth and gaming features are most relevant when the connected devices can use them.
What the Silkland DP80 Means for a Gaming Setup
Bandwidth only helps when both devices support it
The cable’s 80Gbps rating and high-refresh mode list make it a candidate for advanced display combinations.
Actual output depends on the capabilities and settings of both the graphics card and monitor; the product description specifically recommends DP 2.1 UHBR20 support on both for the intended top-end connection.
DSC expands the listed mode combinations
Some of the highest listed resolutions and refresh rates are available with Display Stream Compression enabled.
That makes it useful to check whether your source and display support the relevant mode and DSC, rather than assuming the cable alone determines what the screen can show.
Gaming features address motion and multi-display use
VRR, ALLM, FEC, and MST are included among the cable’s supported features.
They speak to gaming and multi-monitor use, but the corresponding hardware and settings still need to support them; for a single display at modest refresh rates, they may not affect your choice much.
Short reach is the practical constraint
A 1.6-foot cable can keep a close-together PC and monitor connection compact, but leaves limited flexibility if ports sit far apart or cable routing takes a less direct path.
Measure the route between the ports, including a little slack, before ordering.
Alternatives to Silkland DP80
One useful alternative is included; compare the cable length and supported display modes against your setup before choosing.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when the devices are close and its higher bandwidth rating suits your planned setup. The 10-foot option is a better fit when you need substantially more reach and its listed modes meet your display requirements.
- This 10-foot Silkland cable is listed at 54Gbps and supports 4K at up to 240Hz, 8K at up to 120Hz, and 16K at 60Hz with DSC.
- The DP80 is a 1.6-foot cable with an 80Gbps rating and listed support for uncompressed 4K at up to 240Hz.
Is Silkland DP80 Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a compact gaming desk that needs a short, high-bandwidth DisplayPort connection. Its VESA certification, 80Gbps rating, broad feature support, and reinforced construction make a capable package for compatible hardware.
Measure your route first and verify the monitor and graphics card support the mode you want, especially for DP 2.1 UHBR20 or DSC-dependent combinations.
If 1.6 feet is sufficient and your system can use its bandwidth, it is a focused choice; otherwise, prioritize a cable length and connection standard that fit your actual setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A compact choice for gamers building a short DisplayPort 2.1 connection around compatible high-bandwidth graphics cards and monitors.
- VESA-certified DisplayPort 2.1 cable with a stated bandwidth of 80Gbps and male-to-male connectors.
- Measures 1.6 feet and is intended for indoor connections between DisplayPort-equipped computers or graphics cards and monitors.
- Supports uncompressed 4K at up to 240Hz, 8K at up to 60Hz, and 2K at up to 540Hz; listed DSC-enabled modes include up to 16K at 60Hz.
- Compatible with DisplayPort 2.0 and 1.4, and supports VRR, FEC, ALLM, DSC 1.2a, MST, HDR10+, 3D, and HDCP 2.3.